Consist of 2 kinds of contact tips: One is a...
A separate test clip for the ground connection is provided
Temperature Coefficient: Nominal 0.15 x (specified accuracy) / °C @...
Jaws opening size: 45mm max
End-mount light sensor
Data Hold/MAX/Min modes
Temperature Range: - 50 °C - 1200 °C
Relative Humidity: 10 - 95%
Dual Digital & Hold Function Display
Beep Jack Audible & Visible Input Warning
Frequency upto 400Hz (KM 2100); 50 / 60Hz (KM 2200)
Electrical Safety comply with: IEC61010 - 1
Dielectric Strength: 2000V/min
60 min Time limit for continuous measurement at 200 V
Stores up to 200 readings
Dual display of temperature and humidity
Over temperature shut-down
Impact resistant enclosure
CH1 Sync output
Dual channels/dual traces, X-Y mode
10 Hz Minimum Resolution Bandwidth (RBW)
Frequency Range from 9 kHz up to 3.2 GHz
Back-Lighted Easy-to-Read LCD Display
Fast 80ms Peak-RMS Mode to Capture in-Rush Current
Auto Power off: If There is no Operation of the...
True RMS Measurement
Recessed Safety designed Input Jacks
18.5 mm
Five wind velocity units: m/s, Km/h, ft/min, Knots, mph
Two temperature units: °C / °F
Audible Continuity Test
Number of Counts: 4000
It does automatic test for open Circuits, Shorts, miswires, reversals
It can quickly test Ethernet 10Bose - T(TP/STP), AT &...
Basic Accuracy: 20%rdg + 2dgts
CA 500 Current Clamp is a Transducer which will allow...
The electrode module are changeable for replacement by user
Large LCD display 21 x 18mm for easy reading
With the longer shelter to make the 3 LED indicators
3 LED indicators in a circle for easier viewing in
Frequency range: 40 - 70Hz
Compatible with most hot sticks
Sine Wave Nature: Output Voltage: 5V, Distortion ratio: <0.1% 400Hz...
Output for empty carry arrive at 5V, 600W carried will
Die cast Aluminium Earthing Instrument
Discharge Rod: 3 Section x 5 ft Height
VFD-V & VFD-HZ function
Auto Check Voltage & Ohms
Standard Sound rigging values are 94 dB and 114 dB
Low battery indicator
Analog Output: RT - A: 4 - 20mA
Isolation: Power, digital output and analog output are isolated and
Data Hold facility
Over Range indication
rubber gripper for holding it firmly when making measurements of
reinforcement gives high mechanical strength
Relative - zero mode
Back - lighted easy - to - read LCD display