Shop U-Tech Lab Supplies Online

Lid is also Double Walled Properly Insulated & is with

Insulation is done with Thick Glass Wool to Prevent Any

Consists of: Inbuilt Prefill, Cation & Anion Resin Columns

Beaded Heating Elements are Placed in Ribs, at Bottom &

Inner Chamber is Provided with Ribs for Adjusting Perforated Selves

Retaining All Air-Borne Particles of Size 0.3 Micron

Working Area is Illuminated by Fluorescent Lighting Fitted to the

Temperature Range from Ambient to -20 deg C is Achieved

Gap Between the Inner & Outer Wall is Filled with

Variable Speed Motor is Fitted Outside of the Inner Chamber

Fitted with Air Circulation Fan for Temperature Uniformity

Inner Chamber is Provided with Ribs for Adjusting Perforated Selves

Beaded Heating Elements are Placed in Ribs, at Bottom &

Kahn Racks, Bottles or Flasks of Different Sizes can be

DC Motor Drive with Continuously Variable Electronic Speed Regulator

Temperature is Controlled by Microprocessor Pid Controller

High Grade Refractory Cement & Backed by High Density Ceramic

Microprocessor Based pH/Temperature/mV Meter

7 Digit Having Auto Temperature Compensation

Platform is Mounted on Ball Bearing Crank Shafts

Heavy Duty Motor Coupled by Means of V-Belt with Pitch

Precisely Controlled by a Knob on the Front Panel

Melting Point is Displayed on the 3½ Digit Mounted on

Assembly Consists of a Glass Flask with Embedded Heating Elements

Double Wall Coiled Condenser has Standard Ground Glass Joints

Heated Water Passes to the Evaporator Through a Water Level

It Gets Heated Nearly to the Boiling Point thus Economising

Speed can be Controlled Through a Mechanical Speed Control System

Platform is Mounted on Ball Bearing Crank Shafts

Exterior Illumination with Fluorescent Tubes Fitted on Both Sides of

Gap Between Inner & Outer Wall is Fitted with High

Working Area is Illuminated by Fluorescent Lighting Fitted to the

Air is Drawn Through Pre-Filter & is Made to Pass

Heavy Duty Motor Coupled by Means of V-Belt with Pitch

Platform is Mounted on Ball Bearing Crank Shafts

Temperature is Controlled by Microprocessor Pid Controller

High Grade Refractory Cement & Backed by High Density Ceramic

Gap Between the Two Walls is Duly Filled with High

Capable of with Standing a High Vacuum & Provided with...

Space Under the Work Station can be Provided with Storage

Small Wash Basin with Connections Provided for Inlet & Outlet

Angle Tilt of 20 to 60 the Unit is Fitted

Pumps are Fabricated Out of High Grade Cast Iron &

All Vacuum Pumps are Fitted with Belt Guard

Tabular Mild Steel Pipe Duty Painted for Longer Life

Covered with Thick Unbreakable Plexi Glass & Each Rack is

Temperature is Controlled by Microprocessor Pid Controller

High Grade Refractory Cement & Backed by High Density Ceramic

Gap Between the Inner & Outer Wall is Filled with

Temperature Range from Ambient to -20 deg C is Achieved

Resolution of Digital Controller Is 0.1 deg C

Motorized Powerful Two Number Fans in Each Chamber for Uniform

Corporates a Slipping Clutch Mechanism Which Make Reading of Penetration

A Rack & Pinion & Pointer Assembly Provides Fine Adjustment

Kahn Racks, Bottles or Flasks of Different Sizes can be

The Rate of Motion can be Adjusted by Electronic Speed

Air is Drawn Through Pre-Filter & is Made to Pass

Working Area is Illuminated by Fluorescent Lighting Fitted to the

Heavy Duty Motor Coupled by Means of V-Belt with Pitch

Speed can be Controlled Through a Mechanical Speed Control System

Assembly Consists of a Glass Flask with Embedded Heating Elements

Double Wall Coiled Condenser has Standard Ground Glass Joints