Trim : Cu-Alloy
Integral Seat
Design Standard Api 594
Being Light in Weight, is More Rigid than the Standard...
Design Standard Bs En Iso 17292 (Bs 5351)
Three Piece Design & Superb in Quality & Performance
Flanged Ends to Din 2533 Pn 16Rf
Minimum Pressure Drop Inside the Body Due to Streamlined Body
Bolted Cover, Straight Pattern
Minimum Pressure Drop Inside the Body Due to Well Contoured
Rigid & Sturdy Design, Handwheel Operated & Flange Ends As
Design Standard is 14846 Pn 1.0
Metal Disc Is Mushroom Shaped With Spherical Seating Surface
Renewable 13 Cr Stainless Steel(AISI 410)
Design Standard Bs En Iso 17292 (Bs 5351)
Reduced Bore & Three Piece Design
Flanged Ends to Din 2533 Pn 16Rf
Angle Pattern, Bolted Cover
Bolted Bonnet, Inside Screw, Non-Rising Stem
Design Standard is 14846 Pn 1.0
Straight Pattern, Outside Screw, Yoke Type, Rising Stem & Bolted
Minimum Pressure Drop Inside the Body Due to Streamlined Body
Screwed Female Ends to Bspt / Npt / Socket Weld
Design Standard Bs En Iso 17292 (Bs 5351)
Minimum Pressure Drop Inside the Body Due to Streamlined Body
Flanged Ends to Din 2533 Pn 16Rf
Straight Pattern, Outside Screw, Yoke Type, Rising Stem
Flanged Ends to Din 2533 Pn 16Rf
Bolted Bonnet, Outside Screw, Yoke Type, Rising Spindle, Solid Wedge
Design Reference Standard is 14846
Wafer Type Design, To�Take Lesser Space than the Conventional�Check Valve
Being Light in Weight, is More Rigid than the Standard...
Design Reference Standard is 14846
Rigid & Sturdy Design, Hand Wheel Operated & Flanged Ends
Wafer Type Design, To�Take Lesser Space than the Conventional�Check Valve
Design Standard Api 594
Bolted Cover & Screwed Female Ends to Bspt / Npt
Body & Cover Are Phosphated, to Ensure Maximum Protection from
Being Light in Weight, is More Rigid than the Standard...
Design Standard Api 594
Trim : Cu Alloy
Integral seat
Screwed in Cover
Integral Seat
Trim : Cu-Alloy
Screwed in Cover
Trim : Cu Alloy
Integral seat
Integral Seat
Trim : Cu-Alloy
Design Reference Standard is 14846
Bolted Bonnet, Outside Screw, Yoke Type, Rising Spindle, Solid Wedge
Design Standard is 14846 Pn 1.0
Bolted Bonnet, Inside Screw, Non-Rising Stem
Rigid & Sturdy Design, Handwheel Operated & Flange Ends As
Design Standard is 14846 Pn 1.0
Wafer Type Design, To�Take Lesser Space than the Conventional�Check Valve
Being Light in Weight, is More Rigid than the Standard...
Flanged Ends to Asme B�B16.5 Class-150
Three Piece Design & Superb in Quality & Performance
Screwed Female Ends to Bspt / Npt / Socket Weld
Design Standard Bs En Iso 17292 (Bs 5351)
Full Bore & Sleek in Design, Ease of Installation
Handy Device Used to Release Entrapped Air in Any Piping
Flanged Ends to Din 2545 Pn�40
Bolted Cover, Straight Pattern
Three Piece Design & Superb in Quality & Performance
Flanged Ends to Asme B�B16.5 Class 150
S.G Iron Construction & S.G Iron Disc Which is Accurately
Design Standard is 13095 / Bs En 593 (Bs 5155)
Reduced Bore, Three Piece Design & Superb in Quality &
Screwed Female Ends to Bspt / Npt / Socket Weld
Screwed in Cover
Integral Seat