Design Standard Api 594
Wafer Type Design, To�Take Lesser Space than the Conventional�Check Valve
Design Standard is 14846 Pn 1.0
Bolted Bonnet, Inside Screw, Non-Rising Stem
Bolted Cover, Straight Pattern
Minimum Pressure Drop Inside the Body Due to Well Contoured
Renewable 13 Cr Stainless Steel(AISI 410)
Metal Disc Is Mushroom Shaped With Spherical Seating Surface
Screwed Female Ends to is 554 / Bs 21 /
Permits Flow in One Direction & Closes Automatically if the
Straight Pattern, Outside Screw, Yoke Type, Rising Stem
Flanged Ends to Din 2533 Pn 16Rf
Screwed Female Ends to Bspt / Npt / Socket Weld
Reduced Bore & Three Piece Design
Three Piece Design & Superb in Quality & Performance
Flanged Ends to Asme B�B16.5 Class-150
Rigid & Sturdy Design, Handwheel Operated & Flange Ends As
Design Standard is 14846 Pn 1.0
Flanged Ends to Din 2545 Pn�40
Straight Pattern, Outside Screw, Yoke Type, Rising Stem & Bolted
Design Standard Bs En Iso 17292 (Bs 5351)
Three Piece Design & Superb in Quality & Performance
Provision for Re-Packing Under Pressure
Screwed on Bonnet, Rising Stem
Reduced Bore & Three Piece Design
Screwed Female Ends to Bspt / Npt / Socket Weld
Minimum Pressure Drop Inside the Body Due to Streamlined Body
Flanged Ends to Din 2533 Pn 16Rf
Bolted Cover, Straight Pattern
Minimum Pressure Drop Inside the Body Due to Well Contoured
Screwed in Cover
Integral Seat
Integral Seat
Screwed in Cover
Integral seat
Trim : Cu Alloy
Trim : Cu-Alloy
Integral Seat
Trim : Cu-Alloy
Integral Seat
Trim : Cu-Alloy
Integral Seat
Integral Seat
Trim : Cu-Alloy
Trim : Cu-Alloy
Screwed in Cover
Design Standard Bs En Iso 17292 (Bs 5351)
Three Piece Design & Superb in Quality & Performance
Angle Pattern, Bolted Cover
Flanged Ends to Din 2533 Pn 16Rf
Screwed Male End As Per is 554 / Bs 21
Open Discharge Type & Metal to Rubber�Contact Seating
Wafer Type Design, To�Take Lesser Space than the Conventional�Check Valve
Being Light in Weight, is More Rigid than the Standard...
Open Discharge Type & Metal to Rubber�Contact Seating
Screwed Male End As Per is 554 / Bs 21
Provision for Re-Packing Under Pressure & Minimum Pressure Drop Inside
Straight Pattern, Outside Screw, Yoke Type, Rising Stem
Flanged Ends to Din 2545 Pn�40
Bolted Cover, Straight Pattern
Wafer Type, Lever Operated & S.G Iron Construction
Design Standard is 13095 / Bs En 593
Screwed in Cover
Trim : Cu-Alloy
Trim : Cu-Alloy
Screwed in Cover
Integral Seat
Screwed in Cover
Integral seat
Screwed in Cover
Screwed in Cover
Trim : Cu-Alloy
Trim : Cu-Alloy
Screwed in Cover
Integral seat
Screwed in Cover
Screwed Female Ends to Bspt
Straight Pattern, Screwed & Bolted Cover
Flanged Ends to Din 2545 Pn�40
Straight Pattern, Outside Screw, Yoke Type, Rising Stem & Bolted