Medium: Compressed air-Dry air, Filtered, Lubricated
Medium: Compressed air-Dry air, Filtered, Lubricated
Medium: Compressed air-Dry air, Filtered, Lubricated
End Details: Flanges as per BS 4504 Part-1/DIN 2545 RF
Type of Seat: Renewable
Medium: Compressed air-Dry air, Filtered, Lubricated
Provided with Stainless Steel Ball
Premium Quality Ptfe Gland Packing & Seating.
Screwed Female Ends to is 554 / Bs 21 /
Provided With�Stainless Steel Ball
Integrally moulded rubber lining (EPDM / Nitrile / Neoprene/Viton/Silicon) as...
S.G Iron construction
Design Standard is 13095 / Bs En 593
Wafer Type, Lever Operated & S.G Iron Construction
Screwed Male End As Per is 554 / Bs 21
Full Bore & Sleek in Design, Ease of Installation
Straight Pattern, Outside Screw, Yoke Type, Rising Stem
Provision for Re-Packing Under Pressure & Minimum Pressure Drop Inside
Screwed Female Ends to Bspt / Npt / Socket Weld
Reduced Bore & Three Piece Design
Screwed Female Ends to Bspt
Straight Pattern, Screwed & Bolted Cover
Screwed Female Ends to is 554 / Bs 21 /
Full Bore, Two Piece Design
Design Standard is 13095 / Bs En 593
Wafer Type, Lever Operated & S.G Iron Construction
Design Standard Api 594
Being Light in Weight, is More Rigid than the Standard...
Premium Quality Ptfe Gland Packing & Seating.
Screwed Female Ends to is 554 / Bs 21 /
Flanged Ends to is 778
Screwed in Bonnet, Inside Screw, Rising Stem, Integral Seat
Three Piece Design & Superb in Quality & Performance
Design Standard Bs En Iso 17292
Screwed in Bonnet, Meant for Horizontal Lines Only
Metal Disc is Mushroom Shaped with Spherical Seating Surface &
Design Standard is 13095 / Bs En 593 (Bs 5155)
S.G Iron Construction & S.G Iron Disc Which is Accurately
Flanged Ends to Din 2533 Pn 16Rf.
Flanged Ends to Din 2533 Pn 16Rf
Screwed in Bonnet, Inside Screw, Rising Stem, Integral Seat
Provision for Re-Packing Under Pressure
S.G Iron Disc Which is Accurately Guided Between the Two
Design Standard is 13095 / Bs En 593
Reduced Bore, Three Piece Design & Superb in Quality &
Design Standard Bs En Iso 17292 (Bs 5351)
Permits Flow in One Direction & Shuts Automatically if the
Screwed Female Ends to is 554 / Bs 21 /
Single Piece Design & Meant for Vertical Lines Only
Screwed Female Ends to is 554 / Bs 21 /
Design Standard is 5312 1
Seating Design Swing Type & Renewable Seat with Premium Quality
Reduced Bore, Three Piece Design & Superb in Quality &
Screwed Female Ends to Bspt / Npt / Socket Weld
Body & Bonnet Are Phosphated, to Ensure Maximum Resistance from
Bolted Bonnet, Outside Screw, Yoke Type, Rising Stem
Premium Quality Ptfe Gland Packing & Design Standard is 778
Provision for Re-Packing Under Pressure
Bolted Bonnet, Inside Screw, Non-Rising Stem
Design Standard is 14846 Pn 1.0
Wafer Type, Lever Operated & S.G Iron Construction
Design Standard is 13095 / Bs En 593