Hover to Zoom
Brand | |
Applications | Smooth surface with minimum slope is required to apply the membrane The surface is first cleaned to eliminate all sharp projections Suitable primer is then coated on the surface Hyperplas Polyster is unrolled over the surface with torch application (with overlaps of 10cm) and bonded to the substrate The overlaps are to be sealed with flame torch Special care is to be taken at singularities such as drains, expansion joints etc. |
Coverage Area | 1x10 sq m |
Thickness | 4 mm |
It Consist of the plastic center core along with two layers of polymeric asphalt. In addition to that it comprises of a core of Fiberglass which yields more tensile strength to the membrane and another layer of Polymeric asphalt. Membrane having higher tensile strength and with fiberglass. Reinforcements are recommended to be used in place where structural movement is less and load factor over waterproofing membrane is high.
Browse through the extensive list of Waterproofing at Moglix. Shop online for other IWL Waterproofing. available at Moglix in the lowest price range.