Auto Power Off
Overload Protection & Multiple Test Facility
The Upper Limit of the Frequency if 20 MHz
Has Trms Sensor Type
Low Power Consumption
Equipped with Self Testing Functions
Large LCD Display with Auto/Manual Range
Capacitance, Frequency / Duty Cycle, Temperature and Transistor Test
Dc Voltage Range 0-1000 V
Alaa Battery Used, Hence can Easily Replace the Battery When
Auto-Ranging Functionality for Hassle-Free Operation
Clamp Design for Convenient Non-Contact Measurement
Data Hold, Transistor & Diode Test
Rugged & Durable Design
3 � Digit 17 mm Lcd Display
Large, Easy to Read Display
Rugged & Durable Design
Auto Power Off
Single Person Push Button Operation, High Accuracy, 5% of Indicated
85% of Rated Voltage for Insulation Resistance & Measurement from
AC/DC voltage, resistance,capacitance, frequency measurment
AC Accuracy: ± 1% + 3 digit
Low Battery is Indicated
APO, Capacitance, Frequency
Large Lcd for Easy Reading
Overload Protection on All Ranges
Check the RJ11& RJ45 Cable quickly
Visible LED status display
Diode and Continuity test
Data hold & Back Light
Data Hold, Max Hold facility
Low Battery Indication
It is good for electrical measurements as the readings are
APO Capacitance, Frequency, Duty Cycle & temperature Ranges
Diode Test & Data Hold
50% Bigger Display with Bright White Backlight
Fully Protected in the Range
Clamp Open: 52mm
Easy to Read Backlight Display
Slim, Ergonomic Design is Easy to Carry & Simple to
Rugged, Durable Design, 3½ Digital Multimeter with Manual Range &
Overload Protection & Multiple Test Facility
Y6 Digit Clamp Meter with Backlight
Jaw Open : 28mm
Has a basic dc accuracy of 0.5%.
Batteries are easy to replace.
Data Hold Function
Light Weight Easy to Carry
deg C/F display selection
Low Battery indication
High Voltage LED Indication, Provision For Using Battery Adaptor
Terminal Voltage more than 85% of Rated Voltage for Insulation...
Auto backlight off
Equipped with comfortable protective cover, test lead hanging slot
Accurately Measures Ac/dc Current Up to 1000A & Voltage Up
Provides Timely Alerts for Battery Replacement, Preventing Disruptions During Critical
Data Freeze, Autoranging, Reading Storage, Backlight, Led Indicators & Audible
Low Battery Indication
Backlight
Diode Test
Approx 30 Min
Data Hold, Max. / Min. Value Hold
Data Hold facility
Both Earth Resistance and Earth Resistivity can be measured
300 Ohm Resistance Range with Continuity Check
Large, Easy-To-Read Display for Easy Viewing
Single Person Push Button Operation, Designed to Generally Confirm to
High Voltage LED Indication, Provision For Using Battery Adaptor
Data Hold, Auto Range, Auto Power Off, Lcd Background Light
Complete with Test Leads, Heavy Duty Carry Case & Six
Quick response: The quick response saves the time and extend
Tolerance of voltage across measuring terminals: Within ( /-)10% of...
The meter will be switch off if no range switch
Long Battery Life (Upto 200 hrs)
Display: 2000 Counts
Jaw Opening: 50Mm/2.0"
Used for Monitoring & Collecting Data of Environmental Temperature &
Download Collected Data Through Pc S Usb
The electrical power testing tools are helpful instruments which are smaller in size. These check electric continuity, resistance, voltage, current, and more. Licenced electricians and electrical contractors frequently use it to check live wires, electrical devices, switchgear, or power transformers. They are both single-function and multi-function devices capable of carrying out standard electrical testing tasks. Clamp metres, insulation testers, multimeters, ohmmeters, voltage detectors, etc., are a few examples of the different types of electrical testers.
Electrical power testing tools are necessary if anyone wants to safeguard themselves against potential explosions, fires, shocks, and other dangers. They are pretty significant for several different industrial sectors. Moreover, Electrical testing tools help to check for the system's correct operation and locate any defects already present. These tools are primarily utilised in engineering and assembly duties and while checking or debugging manufacturing units in the field.
Clamp Meters: It is a testing device for electrical systems because it combines a current sensor and a digital multimeter. It is recommended to monitor the circuit's high amount of current without cutting it off. The most sophisticated models may monitor voltage, continuity, and resistance in addition to windcurrent.
Multimeters: A multimeter is an electrical power testing device with several built-in measurement features. It can measure various characteristics, including voltage, current, and resistance. The majority of its users are technicians in the electrical sector. Digital multimeters can do all tasks from AC to DC and have a digitised resolution.
Capacitor Testers: An electrical testing tool called a capacitance tester calculates the capacitance of discrete capacitors. Depending on the meter's level of sophistication, it might merely show capacitance or measure things like leakage, equivalent series resistance, and inductance. At a reasonable price, you can get a digital capacitor tester and a capacitor leakage tester online at moglix.com.
Insulation Testers: Insulation in cables and motor coils must be measured to avoid accidents and damage to installed equipment. According to the safety code of conduct, it is not only essential but also required. Additionally, these devices determine if newly installed equipment can be adequately powered and gradually lengthen the lives of the equipment. Insulation testers check for dangerous contamination, filth, moisture, severe deterioration, and the functioning of a whole insulation system.
Conductivity & Temperature Meters: Environmental specialists who monitor water sources and water quality changes are advised to use these conductivity and temperature meters. These sophisticated, durable, and reasonably priced equipment can quickly and precisely detect temperature and conductivity in any laboratory. These digital conductivity meters measure the acidity and alkalinity of freshwater, saltwater, drinking water, treated water, brine solution, and other chemical solutions.
Voltage Detectors: An electronic device known as a voltage detector is used to identify active wires in electrical circuits. It has a single testing point. Additionally called non-contact voltage testing testers or non-contact voltage testing detectors, they have these names. AC systems employ voltage detectors. Besides having a high input impedance, a voltage detector may also hold itself.
Motor & Phasing Meters: Motor and phasing meters aid in determining the direction of a three-phase motor when it is linked to a power supply. They can help to guarantee proper motor installation and avoid damage to the engine or electrical system by determining the phases and rotation. The most excellent motor rotation meter can be purchased at the best price online at moglix.com.
Minimise the chance of injury when using the product: An electrical safety test reveals whether or not one's product is constructed correctly, allowing one to prevent or minimise the chance that it may endanger people, animals, and property.
Nonstop Current Ratings: To determine whether a component is appropriate or effective in various situations, check the continuous current rating of the element. It indicates whether the current can pass through the device at a specific temperature or if it is inappropriate for the task.
Interrupting Rating Maximum: Components like fuses, circuit breakers, and other devices have a specific breaking capability to manage the power safely without arcing or damage. A gadget should always have a maximum interrupting rating before being used in a particular environment.
Additional Security Issues: The measurement of a device's safety features depends on various elements. The safety elements are influenced by several variables, including temperature, location, environment, current ratings, and breaking capability.
Quality Control: Quality is the most crucial factor when buying electrical Power Tools. Health and safety tests should be performed on the products or materials. High-quality parts function at their highest level and last longer. Get the quality-assurance certificate and compliance when you purchase an item.
Promona: Promona is a leading electrical power testing tool manefracture in India. They assure best quality in every product. Their electrical testings equipments are widely renowned for their excellent performance and shock proof nature. Pomona offers banana plag, holder, BNC and many more.
Fluke: Fluke offers a range of fundamental electrical testers, including open-jaw and open-fork current testers and non-contact voltage testing testers with continuity detectors. Electrical testers and voltage detectors may be utilised in any application.
KUSAM-MECO: KUSAM-MECO is now the top business in India's measurement and control sector, which is unique. We are committed to providing the most advanced control and instrumentation equipment available. KUSAM-MECO is now the top business in India's measurement and control sector, which is unique.
METRAVI: METRAVI is one of India's top producers and distributors of electrical and electronic testing and measuring equipment. The METRAVI line of instruments provides you with the most significant levels of accuracy, toughness, and dependability. They have everything, including basic multimeters, clamp meters, infrared thermometers, voltage, and amperage meters, insulation testers, calibrators, oscilloscopes, spectrum analysers, and high voltage testing gear.
Kyoritsu: Kyoritsu has prioritised client happiness and offered high-quality products and services. The extensive range of testers has contributed to technological advancements and industrial infrastructures worldwide.
Electrical power systems and equipment must be tested and maintained to ensure safety and operating efficiency. Considering the importance of electrical power testing, Moglix has developed a new line of electric power testing equipment. You can get electric power testing equipment at Moglix from reputable manufacturers like Bosch, Mastech, Fluke, and MetroQ. To acquire the latest range of electrical testing tools at affordable prices, check the newest range available at Moglix.
Latest Models | Price | Discount |
---|---|---|
Meco 750V Auto Ranging Digital Multimeter, 171B+TRMS | ₹2,719 | 18% OFF |
Meco Autoranging Digital Multimeter, 153B+TRMS | ₹2,539 | 18% OFF |
HTC PSD II Personal Safety Voltage Detector | ₹689 | 11% OFF |
HTC DM-97 Digital Multimeter | ₹1,649 | 9% OFF |
HTC CM-2030 Digital AC Clamp Meter 1000 A 750 V | ₹1,099 | 50% OFF |
Metravi DT-225 Digital AC Clamp Meter 400 A 600 V | ₹2,999 | 26% OFF |
HTC DM-830L+ Digital Manual Multimeter with Backlight | ₹649 | 27% OFF |
Fluke 362 Digital Clamp Meter, 5 Digit Display Count, 18mm, 300 Ohms | ₹8,529 | 20% OFF |
HTC DM-83T Digital Multimeter with Backlight | ₹919 | 54% OFF |
Meco MC 906BA 1000V Analog Insulation Tester with Battery Adaptor | ₹2,179 | 14% OFF |