Shop Borosil Lab Supplies Online

With Glass Stopcock

To Set Zero Release Pressure to Allow Excess Liquid to

Nickel-Plated Brass Burner Tube with Rotatable Air Regulator

Bunsen Burner 13mm/11mm Ideal for Use with Natural Gas and

Small Amounts of Solids Can be Collected & Separated

Higher Density Fraction Collects in the Pointed Centre of the

To Fill Burette Apply a Slight Positive Pressure to Lower

To Set Zero Release Pressure to Allow Excess Liquid to

An Outer Interchangeable Joint at the Top & a Smaller

These Joints are Made to the Same Precision as All

Provided with Chemically Inert PTFE Blade

The Shape Facilitates Uniform Heating

Accessories, Thermometer, Column, Dropping Funnels, Boiling Capillaries, Etc. Can be

Crucibles Should not be Subjected to Sudden Temperature Changes

Particularly Adapted to Analytical Work Where Precipitates are Dried to

Thick Walled, Mechanically Very Resistance Borosilicate Glass

Used in COD Disintegration

Greater Surface Area than the Liebig Condenser Owing to a

This Method Enables Effective Separation with Relatively Small Quantities of

Re-direct Regents with Recirculation Mode

Work Accurately with 3 Calibrated Pre-set Speeds

Particularly Adapted to Analytical Work Where Precipitates are Dried to

Crucibles Should not be Subjected to Sudden Temperature Changes

Especially Useful Where the Filter Paper May be Attacked By

Resistant to Corrosion and Heat

Can be Closed with Glass Stopper

Narrow Mouth & Interchangeable Stopper