Shop Makita Electric Hammers Online

Adapted for SDS Plus bits

Operation mode change lever positioned on the bottom of gear

Recessed operation mode switch helps prevent it from being damaged

Dual mode operation rotation with hammering and hammering only

High durability in mechanical parts, motor and carbon brush.

Speed and torque in reverse are the same as forward

Compact and lightweight for maximum control

Two action sliding chuck for easy bit installation and removal

Comfortable operation at hammering downward

Suppression of motor speedduring no-load reduces vibration of tool body

Depth gauge for increased drilling consistency

One-touch sliding chuck enables easy bit change

Compact and lightweight design for reduced operator fatigue

Satisfactory chipping performance

3 operation modes, Hammering, Hammering with rotation, Rotation

L.E.D. power light indicates switch failure or cord damage

Automatic brush cut-off protects commutator from damage for longer tool

17 mm Hex Shank

Satisfactory chipping performance

Torque limiting clutch engineered to prevent gear damage by automatically

Torque Limiting Clutch Engineered to Prevent Gear Damage

Variable speed + reversible rotation.

2 operation modes -hammering with rotation and rotation only.

LED power light indicates switch failure or cord damage

Double insulated

Customer Care Number: 8590432003

LED job light with after glow function

Vibration absorbing Handle and Good tool-balance provide more control and

High durability in mechanical parts, motor and carbon brush.

One-touch sliding chuck enables easy bit change.

Recessed Lock-On Button for Continuous Use

Easy-to-grip Handle gives Maximum Power

Easy to grip round shape barrel protected by rubber cover

Soft rubber grip side handle and anti-vibration spring on rear

Easy & Comfortable

To Keep Pulling Trigger for Long Hours When Hammering

Less bit wobbling

Operation mode change lever positioned on the bottom of gear

Customer Care Number: 8590432003

Torque limiter engineered to prevent gear damage by automatically disengaging

3-mode operation for Rotation Only, Hammering with Rotation or Hammering

Variable & Constant Speed Control

One-Touch Sliding Chuck for Easy Bit Changes

Chipping performance ensures minimum power loss even when bull point

High durability

Variable speed + reversible rotation

2 operation modes -hammering with rotation and rotation only

Detachable Dust collection system.

Compact and lightweight design.

Good repairability

Rubberised soft grip

Highest-in-class efficiency in both drilling and chipping.

Compact L-shaped motor housing.

Soft start suppresses start-up reaction for more control and better

Constant speed control automatically applies additional power to the motor...

Double insulated

Forward/Reverse Lever