Parallel Shank Drills

Buy the Parallel Shank Drills for All the Drill Chucks

Do you want the parallel shank drill for your drill chuck? There are several types of shank drills of different sizes, like 2mm, 2.2mm, 5mm and more. Generally, selecting the straight shank drill price starts from Rs. 100 and above, and you will find high quality ones in the higher price range. These shank drills easily fit into hand drills, bench drills, and machine drills chucks without needing special spindle fittings like a Taper shank drill bit. Understand all the specifications before buying these cutting tools to ensure secure and effective work. 

What are Parallel Shank Drills?

Parallel shank drill, also known as a straight shank drill. It is a drill bit where the shank diameter is cylindrical and uniform across its length. This shape allows it to be clamped securely inside a drill chuck. It usually have component like- 

>> Point (Tip): The cutting end that penetrates the material.

>> Cutting Edges (Lips): Sharp edges that remove material.

>> Flutes: Spiral grooves that allow chip evacuation.

>> Margin: It offers stability and maintains the hole diameter. 

>> Shank: The parallel cylindrical portion that is held by the chuck.

How to Use Parallel Shank Drills - In just 5 Steps 

Using a parallel shank drill bit correctly improves performance and extends tool life. So, below are the following steps you can follow- 

STEP 1: Select the Correct Size

Before moving to use the shank drill, always choose the right size that match with your required hole size like 2.2 mm for precision components. For structural fasterns you can opt for the 10 mm. This is important becuase if you select the incorrect size it can lead to loose fasteners or require rework. 

STEP 2: Check Material Compatibility

Different materials require different drill compositions, so select accordingly. Because using the wrong material grade can cause overheating or dulling. 

STEP 3: Secure Properly in the Chuck

Next, insert the shank completely into the drill chuck and tighten evenly on all the jaws. Do it carefully because uneven tightening can cause runout that can lead to oversized holes and poor finish. 

STEP 4: Adjust Drilling Speed (RPM)

Moving with adjusting the drill speed that can be different based on the material. Like soft material needs higher RPM, and hard metal refers to a lower RPM. Make sure the correct speed, because incorrect speed can increase friction and reduce tool life. 

STEP 5: Use Coolant or Cutting Oil

Lastly in the entire you can prefer using coolant or cutting oil because lubrication reduce heat, prevents tool wear and improve surface finish especially when drilling metal.

STEP 6: Maintain Proper Feed Pressure

Lastly, avoid excessive force. Because too much pressure can break smaller sizes like shank drill size 2.2 mm.  

Types of Straight Shank Drill and Their Usages: Which One to Buy?

The following are the different types of Parallel Shank Drills:

Jobber Drill: It is the most common parallel shank drill that is used for many tasks. This comes with standard length, which makes it perfect for general purpose drilling in metal, plastic, and wood.

Stub Drill: This is also called a screw drill, which is shorter than a jobber drill. The short build makes it more strong and rigid. Because it will not bend easily and provide better accuracy.

Long Series Drill: This is a long drill that is longer than the standard jobber drill. It is used when you need to drill deeper holes.

Extra Long Drill: This type of parallel drill is made for very deep hole drilling applications. It is mostly used in heavy engineering or industrial tasks where a standard drill cannot reach.

Parallel Shank Twist Drill: It comes with twisted design that remove chips efficiently while drilling. This designed makes it best option for general metal and wood drilling.

Masonry Parallel Shank Drill: This drill has a carbide tip and is specially made for drilling concrete, bricks, and stone. It is usually used with a hammer drill for better performance.

Flat Drill: This is also called a spade drill that has a flat cutting surface instead of spiral flutes. It is mainly used for rough drilling or making larger holes in wood. 

Important Things to Check Before Buying Parallel Shank Drills 

The following are the most important things that every buyer must check: 

Material of Drill Bit

Your material choice directly affects the durability and performance of the drill, so make sure to choose the drill that suits your drill chuck.

Drill Diameter and Length

Check the overall length of the parallel shank drills. For a deeper drilling capability, go for the longer flute. Because the flute length ensures the depth up to which drilling can be done. 

Point Angle

Look for the correct angle to ensure better certering and faster penetration. For general purpose, go for drilling, opt for 118 degree, and 135 degree for better centering and faster penetration. 

Tolerance and Accuracy

Check the accuracy and tolerance for precision machining; the drill must maintain strict diameter tolerance. Because low quality bit can create oversized holes.

Coating

Checking the coating because it improves heat resistance and tool longevity. You can select black oxide for basic corrosion resistance, and a bright finish for better chip flow in aluminum. 

Compatibility with Drill Chuck

Make sure the shank diameter fits your drill chuck capacity, like 10mm, 13mm, etc. Because improper fit can cause slipping. 

Shop the Best Quality Parallel Shank Drill At Moglix!

Are you looking for a precise and durable straight shank drill? So you will find them available on our platform that are designed for offering the best quality and durability. We listed top brands across our platform like YG-1, Addison, Miranda, Hittco, JK Super Drive, Indian Tools, Dormer Pramet and many more. So you can easily choose the option that suitable with your drill chuck. Explore now to get the fastest doorstep delivery!