Chemical Fixing & Mortars

Reclosable Fix Adapter Allows Reuse After Opening

Ergonomic Handle Allows for Easy Use & Very Fine Pored

High-strength Hybrid Formula- ETA- & ICC-ES-approved for Cracked/uncracked Concrete, Masonry

Simplified Installation- No Hole Cleaning Needed when Paired with Hilti’s...

Resin & Hardener are Stored in Two Separate Chambers &...

The Mortar is Injected Bubble-free From the Drill Hole Base,...

High Load Capacity- Suitable for Heavy-duty Anchoring in Concrete, Including

Approved for Rebar- ETA-certified for Post-installed Rebar Connections

FIS EM Plus is to Be Processed at Temperatures Down...

For Rebar Connections From Diameter 8 to 40mm|Can Be Used...

For Single Point Fixings & Overhead Installations

Resin Capsule for Fixings in Cracked Concrete

For Rebar Connections From Diameter 8 to 40mm|Can Be Used...

FIS EM Plus is to Be Processed at Temperatures Down...

Can be Used with Anchor Rods FIS-A, Internal Threaded Anchor

Strong Bond, Non Toxic & High Coverage

Designed for Use with Water to Produce High-Strength Thixotropic Mortar

For Single Point Fixings & Overhead Installations

Resin Capsule for Fixings in Cracked Concrete

ETA approval for non-cracked concrete

High flexibility

Cures to a hard mass

Moldable: Yes

ETA approval for non-cracked concrete

High flexibility

For Single Point Fixings & Overhead Installations

Resin Capsule for Fixings in Cracked Concrete

FIS P Economical Solution for Anchoring in Masonry

FIS P 300 T can be Used with Stable, Standard

PU is an one-component polyurethane straw foam, based on a

Ideal for back filling, sealing, bonding, isolation, Filling of joints,

FIS EM Plus with Optimized Formulation for Improved Load Values

For Rebar Connections from Diameter: 8-40 mm

Moldable, Ease of mixing

Cures to a hard mass

Clearance fit joints possible upto 0.5 mm

Allows uniform load distribution

High flexibility

ETA approval for non-cracked concrete

Expansion-free anchoring allows low axial spacings and edge distances

Partially used cartridges can easily be reused by changing the

First Injection Mortar System Approval for All Relevant Building Materials

Maximum Load Absorption for Much Greater Security

Moldable: Yes

Can be shaped, drilled, filed, sanded, and painted upon

No excess consumption due to pre-portioned quantities

ETA approval for non-cracked concrete

ETA approval for non-cracked concrete

No excess consumption due to pre-portioned quantities

Fresh foam stains can be removed immediately with fischer PU

Can be cut after approx. 40 minutes

No excess consumption due to pre-portioned quantities

High flexibility

For Single Point Fixings & Overhead Installations

Secure Anchorage of High Loads

Ensures safe mixing of hardening agent and resin components during

10 static mixer

Ideal for back filling, sealing, bonding, isolation, Filling of joints,

PU is an one-component polyurethane straw foam, based on a

For Single Point Fixings & Overhead Installations

Resin Capsule for Fixings in Cracked Concrete

Partially used cartridges can easily be reused by changing the

Expansion-free anchoring allows low axial spacings and edge distances

Used to vertically glue and repair marble, onyx and stone

Aspect: Coloured paste

High flexibility

No excess consumption due to pre-portioned quantities

Moldable, Ease of mixing

Can be shaped, drilled, filed, sanded and painted upon