Check Valvess Under Rs. 10000

Zero Leakage for Soft Seated Valves

Spring Loaded Disc to Prevent Reverse Flow in Pipe Lines

Compact Design of Valves Flexibly Accommodates Various Types of Flange

Spring Loaded Disc to Prevent Reverse Flow in Pipe Lines

The Valves can be Fitted in any Plane Direction in

Zero Leakage for Soft Seated Valves

Stronger, Lighter & Smaller Than Conventional Swing Check Valves, Hence

Disc Check Valves are Simple to Fit Between Two Pipe

Large Solid Handling Capacity

Installation can be Vertically or Horizontally

Installation can be Vertically or Horizontally

Large Solid Handling Capacity

This Valve has a Quality for Withstanding Consistent Performance &

Floating Reinforced Rubber Coated Ball is Used Instead of Hinge-Pin-Disc

Swing Check Type Design

Long Service Life with Minimum Head Loss

Rigid & Sturdy Design with Minimum Head Loss

Long Service Life with Minimum Head Loss

Double Plate with Return Spring Closing System

Minimum Occupation of Space

Swing Check Type Design

Long Service Life with Minimum Head Loss

Minimum Occupation of Space

Double Plate with Return Spring Closing System

Very Low Head Loss

Double Plate with Return Spring Closing System

Very Low Head Loss

Minimum Occupation of Space

Disc Is Guided In Body

Renewable 13 Cr Stainless Steel(AISI 410)

Being Light in Weight, is More Rigid than the Standard...

Wafer Type Design, To�Take Lesser Space than the Conventional�Check Valve

Being Light in Weight, is More Rigid than the Standard...

Design Standard Api 594

Flanged Ends to Din 2533 Pn 16Rf

Angle Pattern, Bolted Cover

Flanged Ends to Din 2545 Pn�40

Minimum Pressure Drop Inside the Body Due to Well Contoured

Design Standard Api 602 & Bsen Iso 15761

Screwed Female Ends to Bspt / Npt / Socket Welded

Angle Pattern, Bolted Cover

Minimum Pressure Drop Inside the Body Due to Streamlined Body

Disc Is Guided In Body

Metal Disc Is Mushroom Shaped With Spherical Seating Surface

Renewable 13 Cr Stainless Steel(AISI 410)

Metal Disc Is Mushroom Shaped With Spherical Seating Surface

Flanged Ends to Bs 10 Table H

Two Piece Design, Screwed Male End to Bsp & Asbestos

Straight Pattern, Screwed & Bolted Cover & Screwed Female Ends

Flanged Ends to Bs 10 Table H

Bolted Cover & Screwed Female Ends to Bspt / Npt

Body & Cover Are Phosphated, to Ensure Maximum Protection from

Test Pressure: 1.5 Mpa

End Connection: Flanged

Design Standard Api 594

Being Light in Weight, is More Rigid than the Standard...

End Details: Flanges as per IS-1538

Trim: Body Seat Ring Gun Metal & Seat Ring Rubber

Bolted Cover

End Details: Flanges as per BS 4504 Part-1/DIN 2545 RF

Screwed in Cover

Integral Seat

Trim: Body Seat Ring Gun Metal & Seat Ring Rubber

End Details: Flanges as per IS:1538

Trim : Cu Alloy

Screwed in Cover

Integral Seat

Trim : Cu-Alloy