Shop Embeddinator Products

Direct Control by Push Button on Board or by Microcontroller

Push Button Interface, Playback can be Edge or Level Activated

Address Line Selector Switch, HT12E, HT12D IC & LED Indication

RF Pair Of Various Frequency i.e. 315/433/434/435/866 & Mounting Holes

16 Switches are Available for Program Defined Task

Compact & Stylish Design on High Quality PCB & It

Adjustable Range Using Preset (Using Potentiometer on Board)

Both Digital & Analog Output Available

Mounting Hole of 2.5 mm diameter for Easy Mounting

Adjustable Range Using Preset (Using Potentiometer On board)

Holes are Spaced 0.1 Inch Apart to Accommodate Standard DIP

800 Points

Screw Terminal for External Power Supply (with Jumper Select Option)

All Port 35 Pins are Breakout Pins are Available at...

Screw Terminal for External Power Supply (with Jumper Select Option)

All Port 32 Pins are Breakout Pins are Available at...

Separate Two Different LED for Power & Programmer Status

Programs All Current 8, 16 & 32 Bit PIC Microcontrollers

Easily Programmable

Open Source IoT Platform

Mounting Holes and Foam Pieces for Easy Mounting of Various

Laser Cut Smooth Chassis

Compact and Ready to Use Design & Professional High Quality

Built in Switches (8 keys), Built in 8 LED Interface

Comparator Output Signal for Driving Ability

2.5mm Mounting Hole Diameter for Easy Mounting

Male Berg Strip for Connection & Run Properly

Uses the Popular L293D Motor Driver IC

Breakout Pins for Connecting to Microcontroller

4 Switches for Manual Testing Status LED'S & Switch Button

Designed for Various Robotic Project without Microcontrollers with Male Berg

Terminal Blocks for Connecting Motors, Power Supply & Berg Sticks

Input Signal Pin Connected to Burg Stick for Easy Accessibility

High Quality Screw Terminals Provided (COM, NC , NO) for

Adjustable Range Using Preset (Using Potentiometer on Board)

It can Work in Both Day & Night Condition Which

Min. Line Spacing: 6 mil

Standard 0.1 Inch Spacing Through Holes

Mounting Hole of 2.5 mm Diameter for Easy Mounting

4 Pin Digital Output Which Make This Device Easy to...

It has a Power Jack, an ICSP Header & a

Based on the ATmega328

No Soldering is Required So it is Easy to Change

A Variety of Electronic Systems may be Prototyped by Using...

11.0592 MHz Crystal Oscillator

Built in Switches (8 keys)

Separate Two Different LED's for Power & Programmer Status

Compact and Ready to Use Design & Professional High Quality

Specially Designed Boot loader Mode by Using Boot Button on

Compact and Ready to Use Design & Professional High Quality

Extra Berg Strip Given for GND, +5V & +9V for

Male Berg Strip Given for Connection

Gigabit Ethernet Over USB 2.0

Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64 Bit SoC at 1.4GHz

Serial Port Bluetooth, Drop in Replacement for Wired Serial Connections

PIO(Programmable Input/Output) control

Specially Designed for Various Robotic Project without microcontrollers

On Board 7805 Voltage regulator available for sourcing regulated 5V