Shop U-Tech Other Lab Supplies Online

Platform is Mounted on Ball Bearing Crank Shafts

Speed can be Controlled Through a Mechanical Speed Control System

Capable of with Standing a High Vacuum & Provided with...

Gap Between the Two Walls is Duly Filled with High

Gap Between the Two Walls is Fitted with High Grade

Housing Auto Water Level Adjuster, Bottom Outlet for Cleaning Waste

Space Under the Work Station can be Provided with Storage

Front Facing Panel is Fitted with 15/5 Amp Socket with

Speed can be Controlled Through a Mechanical Speed Control System

Heavy Duty Motor Coupled by Means of V-Belt with Pitch

This Mixed Bed Deminralizer is Used as Polishing Unit with

The Grinding Vessel & Mortar are all Completely Covered by

Overall Improvement in its Optical Design, Ensures Permanent & Undisturbed...

The Angular Scale from 0 to 360 degree is Sub...

Florescent Tube has an Arrangement for Keeping the Door Open

Sunmica Clad Thick Wooden Board & Sunmica Clad Working Top...

Housing Auto Water Level Adjuster, Bottom Outlet for Cleaning Waste

Working Area is Illuminated by Fluorescent Lighting Fitted to the

Retaining All Air-Borne Particles of Size 0.3 Micron

Provide Uniform Air with Minimum Noise & No Vibration

All Units are Throughly Tested at Works & Meet the

Self Cooler Air Circulation Fan is Fitted to Maintain Uniform

The Gap of 75mm Between the Outer & Inner Wall...

Insulation Between Inner & Outer Wall is Done with Thick

V Belt Driven Motor Operated Blower System in the Side

Fitted with Exterior Illumination Achieved by Fluorescent Tube & 0-24

Glass Window Allows Inspection of Samples Without Disturbing the Inner

Working Area is Illuminated by Fluorescent Lighting Fitted to the

Retaining All Air-Borne Particles of Size 0.3 Micron

Non Corrosive Regeneration Tank

High Capacity Cation & Anion Exchange Resign Up flow Treatment

Sunmica Clad Thick Wooden Board & Sunmica Clad Working Top...

Florescent Tube has an Arrangement for Keeping the Door Open

Working Area is Illuminated by Fluorescent Lighting Fitted to the

Air is Drawn Through Pre-Filter & is Made to Pass

Three Delivery SS Sieves, Brush, L-N key & Plastic Receiver

Fitted with AUE, GE, Crompton & Equivalent Motor

Assembly Consists of a Glass Flask with Embedded Heating Elements

Double Wall Coiled Condenser has Standard Ground Glass Joints

Refrigerant Coils Made of Copper are Heavily Insulated for Maximum

Condense Cap: 12 Tests

Air is Drawn Through Pre-Filter & is Made to Pass

Working Area is Illuminated by Fluorescent Lighting Fitted to the

Condense Cap: 12 Tests

Trap is Given at Non Magnetic Stainless Steel Dished Bottom

Heavy Duty Motor Coupled by Means of V-Belt with Pitch

Platform is Mounted on Ball Bearing Crank Shafts

Self Cooler Air Circulation Fan is Fitted to Maintain Uniform

The Gap of 75mm Between the Outer & Inner Wall...

Angle Tilt of 20 to 60 the Unit is Fitted

Two Vertical & Two Horizontal Rods with Adopters & Screws

Ideal Heater for the Extractors of Soxhlet & Other Types

Speed can be Controlled Through a Mechanical Speed Control System

Platform is Mounted on Ball Bearing Crank Shafts

Units are Used for Sterility Testing when the Membranes Filter...

Heavy Duty Motor Coupled by Means of V-Belt with Pitch

Platform is Mounted on Ball Bearing Crank Shafts

Double Walled, Mounted on Sturdy Angle Iron Frame

Insulation Between Inner & Outer Wall is Done with Thick

Retaining All Air-Borne Particles of Size 0.3 Micron

Working Area is Illuminated by Fluorescent Lighting Fitted to the

Temperature Range from Ambient to -20 deg C is Achieved

Gap Between the Inner & Outer Wall is Filled with

High Grade Refractory Cement & Backed by High Density Ceramic

Temperature is Controlled by Microprocessor Pid Controller