Shop U-Tech products

Fitted with Water Level Indicator & Vaccum Breaker & Whole

Unit is Duly Fitted with Highly Efficient Painted Ring &

Lid is also Double Walled Properly Insulated & is with

Insulation is done with Thick Glass Wool to Prevent Any

Air is Drawn Through Pre-Filter & is Made to Pass

Retaining All Air-Borne Particles of Size 0.3 Micron

Inner Chamber is Provided with Ribs for Adjusting Perforated Selves

Temperature is Controlled by Hydraulic Type Capillary Thermostat

Fitted with Air Circulation Fan for Temperature Uniformity

Variable Speed Motor is Fitted Outside of the Inner Chamber

Temperature is Controlled by Hydraulic Type Capillary Thermostat

Inner Chamber is Provided with Ribs for Adjusting Perforated Selves

Temperature Range from Ambient to -20 deg C is Achieved

Gap Between the Inner & Outer Wall is Filled with

Consists of: Inbuilt Prefill, Cation & Anion Resin Columns

Heated Water Passes to the Evaporator Through a Water Level

It Gets Heated Nearly to the Boiling Point thus Economising

Platform is Mounted on Ball Bearing Crank Shafts

Speed can be Controlled Through a Mechanical Speed Control System

Double Wall Coiled Condenser has Standard Ground Glass Joints

Assembly Consists of a Glass Flask with Embedded Heating Elements

Retaining All Air-Borne Particles of Size 0.3 Micron

Working Area is Illuminated by Fluorescent Lighting Fitted to the

High Grade Refractory Cement & Backed by High Density Ceramic

Temperature is Controlled by Microprocessor Pid Controller

The Rate of Motion can be Adjusted by Electronic Speed

Kahn Racks, Bottles or Flasks of Different Sizes can be

Exterior Illumination with Fluorescent Tubes Fitted on Both Sides of

Unit is Supplied with Three Adjustable Perforated Shelves

Heavy Duty Motor Coupled by Means of V-Belt with Pitch

Speed can be Controlled Through a Mechanical Speed Control System

Microprocessor Based pH/Temperature/mV Meter

7 Digit Having Auto Temperature Compensation

Heavy Duty Motor Coupled by Means of V-Belt with Pitch

Platform is Mounted on Ball Bearing Crank Shafts

Pumps are Fabricated Out of High Grade Cast Iron &

All Pumps are V-Belt Driven

Covered with Thick Unbreakable Plexi Glass & Each Rack is

Tabular Mild Steel Pipe Duty Painted for Longer Life

High Grade Refractory Cement & Backed by High Density Ceramic

Temperature is Controlled by Microprocessor Pid Controller

Angle Tilt of 20 to 60 the Unit is Fitted

The Instrument Basically Consists of a Miniature Furnace with Controllable

Precisely Controlled by a Knob on the Front Panel

Temperature is Controlled by Microprocessor Pid Controller

High Grade Refractory Cement & Backed by High Density Ceramic

Gap Between the Two Walls is Duly Filled with High

Capable of with Standing a High Vacuum & Provided with...

Gap Between the Inner & Outer Wall is Filled with

Temperature Range from Ambient to -20 deg C is Achieved

Platform is Mounted on Ball Bearing Crank Shafts

Speed can be Controlled Through a Mechanical Speed Control System

Space Under the Work Station can be Provided with Storage

Small Wash Basin with Connections Provided for Inlet & Outlet

DC Motor Drive with Continuously Variable Electronic Speed Regulator

The Rate of Motion can be Adjusted by Electronic Speed

Dial Graduate from 0-400 in One Tenth Millimeter Sub Division

Corporates a Slipping Clutch Mechanism Which Make Reading of Penetration

Double Wall Coiled Condenser has Standard Ground Glass Joints

Assembly Consists of a Glass Flask with Embedded Heating Elements

Each Chamber is Provided with 6/14 Perforated Stainless Steel Trays

Both Chamber is Fitted with Controls for Heating & Cooling

Air is Drawn Through Pre-Filter & is Made to Pass

Retaining All Air-Borne Particles of Size 0.3 Micron