Industrial Lubricants

Very Good Anti-Wear & Ep Performance

Superb Resistance to Water Washout & Spray-Off

Excellent Performance in High Speed Applications

Excellent Water & Corrosion Resistance

Broad Multi-Purpose Application

Superb Resistance to Water Washout & Spray-Off

Excellent Wear & Water Wash Out Resistance

Can Withstand Extreme Loads & Shock Loads

As the Magnetic Poles Contact the Object to be Demagnetized,

Demagnetizers Utilize 220 V Single Phase Alternatives Electrical Current

Engineered to Maintain Maximum Viscosity at High Running Temperatures

Lower Moisture Content Than Other Oils

Versatility & Reduced Downtime

Seal Compatibility & Noise Reduction

Provides Consistent Shift Performance for New & Old GM Transmissions

Exceeds the Requirements of General Motors Dexron-VI Specification

cSt @ 100 deg C: 6.7

Pour Point (ASTM D97): -27

High Quality, Great Viscosity & High Performance

Synthetic Lubricant Tailor made for Single & Two Stage Oil-Injected

The High-quality Oil Ensures Maximum Protection

Unique Mix of Additives Tailored to the Specific Needs of

Flash Point COC (ASTM D92): 234

Density @ 15 deg C (ASTM D4052): 0.882

Resistance to Water & Corrosion

Industrial & Automotive Applications

Demulsibility @ 54 deg C (ASTM D1401): 20

Copper strip corrosion 3 Hrs @ 100°C (ASTM D130): 1A

Non-Corrosive, Non-Toxic, Non-Flammable, Safe to Handle & Use

High Quality, Great Viscosity & High Performance

Good Penetration Properties & Lower Evaporation Tendency

Adhesive Chain Oil Does Not Drip or Spin-Off, Silicone-Free &

Copper strip corrosion 3 Hrs @ 100°C (ASTM D130): 1A

cSt @ 100 deg C: 8.5

Hydrophobic Nature & Excellent Lubricity

Stable at Extremely Low Temperatures

Reliable & Enhanced Wear Protection

Promote System Efficiency

Reliable Performance & Extended Service Life

Increase Compressor Efficiency

Thickener Type: Lithium

4-Ball Weld Load (ASTM D 2596): 250 kg

Thickener: Polyurea, Provides Good Protection Against Corrosion & High Temperature

Waste Gas Fans for Aggressive Environment, Ejector Pins in Plastic

Leaves Long Lasting Film that Repels Dust, Dirt​ & Doesn’t

Excellent for Ready to Fire

Used Irrespective of the Type of the Boom or Crane

Less Downtime for Maintenance

Excellent Release Agent, Thread Compound, Conductive Paste & Assembly Paste

Useful as a Plunger Lubricant in Die Casting Application &

The Aviation Industry Also Uses Hydraulic Oil in the Hydraulic...

Hydraulic Oil is Used in the Automotive Industry in Power...

Automotive Manual Transmissions

Resists Sludge Formation Leading to Outstanding System Cleanliness

Specially Designed for Reciprocating Air Compressor & Piston Air Compressors

This is the Top Choice Lubricating Oil for any Air

Formulated to Provide Outstanding Lubrication & Protection in Refrigeration Compressors

Specially Designed to Provide Improved Resistance to Oxidation, Thermal Breakdown

Ensures No Spillage or Spin Off

Neutral in Smell & Taste

Resists Micro Pitting, Provides EP & Wear Protection to Gears

Very Good Oxidation Resistance for Long Drain Interval

cSt @ 100 deg C: 6.7

Pour Point (ASTM D97): -27

This is Also used for Miscellaneous Purposes & Certain Hydraulic

Good Heat Capacity: Fluid will Heat & Cool Quickly

Good Thermal Conductivity & Good Oxidation Stability

Low Volatility & Excellent Wetting Characteristics

Exceptional Soot Dispersions to Control Oil Thickening

Besides Lowering the Maintenance Cost, Generator Set Oil Enhances the

Ensure Reduced Deposits & Low Wear

Excellent Thermal & Oxidation Resistance