Other Lubricants

Manual Transmission Fluid Specially Designed for Front Wheel Drive Vehicles

It is a Versatile Product Which Provides Exceptional Anti-Wear, Anti-Oxidancy,

Protects Under High Pressure

Fully Synthetic Smooth Shifting

Excellent Dewatering & Demulse Properties

Good Coverage Due to Its Low Viscosity

Non-Corrosive, Non-Toxic, Non-Flammable, Safe to Handle & Use

Safe for Rubber & Plastics- Specifically Formulated to Prevent Damage

Temporary Lubrication- Provides Effective Lubrication that Evaporates without Leaving Residue

Non-Toxic, Powerful, Non Scrubbing & Reusable

It is Free From Heavy Metals Like Such as Lead,

Excellent Dewatering & Demulse Properties

Pour Point of This Oil is of -21 Degrees, Hence

Thermal Efficiency: Designed to Enhance Heat Transfer, Improving the Cooling

Provides Excellent Oxidative Stability Under Severe Driving Conditions

Provides Consistent Shift Performance for New & Old GM Transmissions

Very Effective in Protecting All Types of Steel Surfaces Including

It Has a Thickest Film 2.5 Micron & Highest Flash

Provides 12 Months Outdoor Protection & 4 Months of Indoor

Good for Export/Storage Applications & Heavier and Richer in Coating

Corrosion Protection

Excellent Lubrication

Safe for Rubber & Plastics: Water-based Formula is Biodegradable, Non-flammable...

Temporary Lubrication: Provides Excellent Slipperiness for Easy Assembly of Tight-fitting

Eco-friendly: Water-based and Free From Harmful Chemicals, Reducing Environmental Impact

It Reduces Pump Set Choke-up Problem Which Mainly Arises Due

Non-flammable & Ready-to-use-Safe, Easy-to-apply, Aur Maximum Material Compatibility

Temporary Lubrication-Dry Hone Par Slip Finish Khatam, Part Firmly Lock

Excellent De Watering Characteristics & Specialized Thin Dry Film Type

Very Effective in Protecting All Types of Steel Surfaces Including

Removes Soils With No Residue Build-up

Non Chlorinated, Non-conductive and Non-corrosive

Provides 12 Months Outdoor Protection & 4 Months of Indoor

Highest Viscosity, Offering Stronger Coating and Protection

Performs De Watering and Removes All Water Particles From

Easy to Apply, You Can Apply This Oil on a

Silicone Free, Non-Flammable, Safe & Ready to Use

Contains an Inhibitor to Reduce the Attack of the Metal

Excellent Wetting Capacity on Both Ferrous and Non-ferrous Metals

Safe to Use, Free From Chlorinated Solvents, Class I &

Unique Combination of Ingredients & Valve Design Enables a Fine

Creates Thick Protective Film of 4.5 to 4.7 Microns Around

High Flash Point, Makes It Comparatively Safer in High-temperature Handling

Performs De Watering and Removes All Water Particles From

Good Coverage Due to Its Low Viscosity and High Penetration

Temperature Resistant: Works in Extreme Conditions

Long Oil Life: Fewer Oil Changes Required

High Solid, Tacky, Non-Melt Moly Grease in a Spray Can

Excellent Extreme Pressure, Anti-Wear Properties Under Heavy Load/shock Load

Lubricates with Thin Dielectric Lubricant

Prevents Electrical Failures Caused by Moisture & Corrosion

Excellent Release Agent, Thread Compound, Conductive Paste & Assembly Paste

Useful as a Plunger Lubricant in Die Casting Application &

Non-Toxic, Colourless & Generally Odourless

Free From Chlorinated Solvents, Class 1 & Class 2 Ozone-depleting....

Resists to the Affects of Condensation Due to Big Temperature

Displaces Humidity on Metal Surfaces

Exposed to Saltwater Atmosphere

Applicable for Machines & Equipment Operating in Wet Section Condition

Used for Moderate-to-heavy Protection Needs

High Flash Point, Makes It Comparatively Safer in High-temperature Handling

Excellent Insulation Properties

Good Adhesion to a Wide Variety of Substrates

Excellent Demulsibility Leading to Ease of Water Separation From System

Excellent Ability to Release Entrained Air From the System, Thus

Excellent Wear & Water Wash Out Resistance

Can Withstand Extreme Heat Without Melting