Yuzuki ECOSHORED 0-100 HD Shore D Rubber Hardness Tester

Key Features

• Identify the Area on the Material where You Want to Measure Hardness, Ensure the Surface is Flat & Free from any Debris or Irregularities.

• Press the Durometer's Indenter Firmly Onto the Material Surface with a Consistent Amount of Pressure, Hold the Durometer Perpendicular to the Surface Being Tested.

• For Accurate Results, Take Multiple Readings at Different Locations on the Material. Ensure Consistency by Averaging the Readings or Comparing Them Against Each Other.

• Allow the Durometer's Needle to Stabilize for a Few Seconds. Read the Hardness Value Indicated by the Needle on the Durometer's Scale. The Higher the Reading the Harder the Material.

• Here's a Guide on how to Use a Shore D Durometer, Typically Used to Measure the Hardness of Harder Materials Like Hard Rubber & Thermoplastics, Prepare the Durometer Ensure the Durometer is Clean & Calibrated According to the Manufacturer's Instructions. Check that the Device is in Proper Working Condition Before Use.