Shop Kusam Meco Electrical Power Testing Online

Output Current: KM - PS - 302: 0 - 2A

Constant Voltage State: Voltage Stability: < 0.01% + 3mV, Load...

Overload protection 500 V in Resistance range

10 A Fused

Beep Jack Audible & Visible Input Warning

VFD V & Hz Readings

kWHr Recording

Display Hold & PEAK RMS HOLD

H.V.Test: 110 KV

FRP Safe Guard at Top & Bottom Section

Low Ripple & Noise

Two - way regulated power supply can be randomly in

Simple operation

Data hold function - hold the current data

Instant Continuity Buzzer & Battery Check

Easy To Operate, Digital Multimeter is Equipped with a 10A

Half cycle RMS measurement (voltage and current)

Vector, Trend, Bar Graph and events table display

Have constant Voltage & constant current operation mode. C.C &

4 groups 3 LED Digital Display

Display: Large LCD Temperature & Humidity dual Backlight display

Temperature Resolution: 0.1°C / 0.1°F Auto / Manual power off

High Measurement Range

Zero Adjustment by Front Knob

Fast response, MAX/MIN Function

Temperature unit: °C & °F selectable

Data Hold & Relative Mode

Cx Range 200 mF to 2500 mF for Start &

Input Voltage Over Range: Voltage: 200 % Continuous, 300 %

Input Voltage Range: Voltage: 55 - 300V AC, P.T. Ratio

easy to operate with the two buttons to check data,

Device stores maximum 16000 measuring data automatically with selectable sampling

Fast 80ms Peak-RMS Mode to Capture in-Rush Current

Auto-ranging Relative mode with DC-Zero Mode on DCA, DC+ACA Ranges

Basic Accuracy: 20%rdg + 2dgts

It can be used for waveform analysis by connecting it

Canvas Cover to Carry the instrument & Assembled Height

FRP Safe Guard at Top & Bottom Section

Auto power off

Overload Protection

Standard Sound rigging values are 94 dB and 114 dB

Low battery indicator

Easy to replace electrode module and the type of electrode

Large LCD displays pH or ORP or Conductivity or TDS

Die cast Aluminium Earthing Instrument

H.V.Test: 110 KV

Pin type lead, which can easily contact the battery electrodes...

resistance by eliminating lead resistance and contact

resistance by eliminating lead resistance and contact

AC four - terminal method to measure the internal

Diode: Frequency

Backlight

Circuit Test Function: Press the Test button to make sure...

2 ranges for selection (2 function buttons): LOW: 50V -...

Overload protection: LCD will show a "OL" in the highest

Auto Power Off

Altitude upto 2000 meters

Pollution Degree 2

Automatic Zero adjustment

Over range Indication

Auto ranging / Auto power off

High resolution DCA / ACA of 1mA

Data Hold facility

AC/DC voltage, AC/DC current, Resistance, Capacitance, Temperature, Frequency, Diode, Continuity,

Explosion-Proof Products & Measuring the loop Earth System

Amp Tip low - current range calibrated at Jaw -

Display Hold & Non - Contact EF - Detection (NCV)

Annunciators for all ranges

Auto ranging / Auto power off

Selected Range Displayed on LCD & Low Power Consumption CMOS

Test Lead Jack Mechanical Protection Function & Full Range Over-Load

Vibration Test: Randomly 2g, 5 - 500Hz

Warm - up time: Testing under one meter boot -

Select either power or transmission

End-mount light sensor