Shop Motwane Measurement & Testing Online

Temporary storage of 10 readings

Go-No-Go Test facility

For measurements of 4-20 mA current loop signal of transmission

Memory function for maximum and minimum value

Built in special features required for low resistance measurements

Usable for Resistive and inductive load

Fully protected against reversal of battery polarity and over loads

For Hazardous area like fuse in detonators where current should

Display Digit: 0.1 deg C

Industrial grade

Auto ranging clamp meters

Auto AC/DC volt selection

Low battery and over range indication

Contact and Non contact Type Probe

Bright high intensity Red LED'S provide clear visual indication even

It shows leakage current in scrolling form along with IR

Insulation Resistance Test Range: 1 K? - 1 T?

CAT II and IEC 61010 safety compliance

Double Insulation for improved operator safety in hazardous environment.

Low Battery indication "LO BAT" & Overload protection

Automatic Polarity and Auto power off

Special Type of Low Noise Leads to Eliminate

Auto Discharge of Capacitive Load, Linear & Accurate Reading

Auto Power Off

Alarm setting feature with selection range available for resistance and

Soil Resistivity & Earth Resistance Measurement

3/4 Pole Earth Resistance Measurement

Suitable for hazardous environments

Pocket size, Handy and light weight

Temperature measurement

Auto power off

Mains & Battery Operation

Capacitance & AC / DC Voltage measurement

Data Hold

Auto power off

Zero Adjustment

Diode and Continuity Check Functions

Bright high intensity Red LED'S provide clear visual indication even

Supplied as a complete Kit with HV Detector Probe, Telescopic

Cheap and portable

Pulse mode operation, for protecting heat sensitive devices

Highly Rugged Industrial Graded Casing

Stable readings on resistive as well as inductive loads One

Water resistance front panel, fire - proof heavy duty ABS

Current Sensor - Hall effect Sensor

Indicates the presence of High Voltage by audio as well

Bright high intensity Red LED'S provide clear visual indication even

Multipurpose model with IR testing and multimeter functions facility

Maximum test current of 1mA

Internal Data Storage up to 1000 test readings

Auto Power off to enhance battery life

With 450 mm Spike Kit

Low Battery is Displayed Below 6.5 V Approx.

Forget conventional method of isolation of earth pits for measurement

"Stakeless testing", saves time in measuring earth resistance of mesh

Re-chargeable battery operated with charger

AC voltage measurement function upto 750V AC

Over Range Indication

Data hold function