ABB AF26-30-00-11 3 Pole DC Contactor, 1SBL237001R1100

• Conventional Free-air Thermal Current (I_th):

  acc. to IEC 60947-4-1, Open Contactors q = 40 deg C 50 A

• Rated Operational Current AC-1 (I_e):

  (690 V) 40 deg C 45 A
  (690 V) 60 deg C 40 A
  (690 V) 70 deg C 32 A

• Rated Operational Current AC-3 (I_e):

  (220 / 230 / 240 V) 60 deg C 26 A
  (380 / 400 V) 60 deg C 26 A
  (415 V) 60 deg C 26 A
  (440 V) 60 deg C 26 A
  (500 V) 60 deg C 23 A
  (690 V) 60 deg C 17 A

• Rated Operational Power AC-3 (P_e):

  (220 / 230 / 240 V) 6.5 kW
  (380 / 400 V) 11 kW
  (400 V) 11 kW
  (415 V) 11 kW
  (440 V) 15 kW
  (500 V) 15 kW
  (690 V) 15 kW

• Rated Short-time Withstand Current (I_cw):

  at 40 deg C Ambient Temp, in Free Air, from a Cold State 10 s 350 A
  at 40 deg C Ambient Temp, in Free Air, from a Cold State 15 min 50 A
  at 40 deg C Ambient Temp, in Free Air, from a Cold State 1 min 150 A
  at 40 deg C Ambient Temp, in Free Air, from a Cold State 1 s 700 A
  at 40 deg C Ambient Temp, in Free Air, from a Cold State 30 s 225 A
  for 1 s -empty- A

• Maximum Breaking Capacity:

  cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 440 V 500 A
  cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 690 V 200 A

• Maximum Electrical Switching Frequency:

  AC-1 600 cycles per hour
  AC-2 / AC-4 150 cycles per hour
  AC-3 1200 cycles per hour

• Rated Insulation Voltage (U_i):

  acc. to UL/CSA 600 V
  acc. to IEC 60947-4-1 and VDE 0110 (Gr. C) 690 V

• Rated Impulse Withstand Voltage (U_imp):

  6 kV

• Maximum Mechanical Switching Frequency:

  3600 cycles per hour

• Rated Control Circuit Voltage (U_c):

  50 Hz 24 ... 60 V
  60 Hz 24 ... 60 V
  DC Operation 20 ... 60 V

• Connecting Capacity Main Circuit:

  Flexible with Insulated Ferrule 1x 1.5 ... 10 mm²
  Flexible with Insulated Ferrule 2x 1.5 ... 4 mm²
  Flexible with Ferrule 1/2x 1.5 ... 10 mm²
  Rigid 1/2x 2.5 ... 10 mm²

• Connecting Capacity Control Circuit:

  Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²
  Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²
  Rigid 1/2x 1 ... 2.5 mm²

• Wire Stripping Length:

  Control Circuit 10 mm
  Main Circuit 14 mm

• Degree of Protection:

  acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20
  acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP20

Environmental

• Ambient Air Temperature:

  Close to Contactor for Storage -60 ... +80 deg C
  Close to Contactor Fitted with Thermal O/L Relay -25 ... +60 deg C
  Close to Contactor without Thermal O/L Relay -40 ... +70 deg C

• Climatic Withstand:

  Category B according to IEC 60947-1 Annex Q

• Maximum Operating Altitude Permissible:

  3000 m

• Resistance to Vibrations acc. to IEC 60068-2-6:

  5 ... 300 Hz 4 g closed position / 2 g open position

• Resistance to Shock acc. to IEC 60068-2-27:

  Closed, Shock Direction: B1 25 g
  Open, Shock Direction: B1 5 g
  Shock Direction: A 30 g
  Shock Direction: B2 15 g
  Shock Direction: C1 25 g
  Shock Direction: C2 25 g

• RoHS Status:

  Following EU Directive 2011/65/EU

Technical UL/CSA

• General Use Rating UL/CSA:

  (600 V AC) 45 A

• Horsepower Rating UL/CSA:

  (120 V AC) Single Phase 2 Hp
  (240 V AC) Single Phase 3 Hp
  (200 ... 208 V AC) Three Phase 7-1/2 Hp
  (220 ... 240 V AC) Three Phase 7-1/2 Hp
  (440 ... 480 V AC) Three Phase 15 Hp
  (550 ... 600 V AC) Three Phase 20 Hp

• Tightening Torque UL/CSA:

  Control Circuit 11 in·lb
  Main Circuit 22 in·lb