ABB AX40-30-10-81 3 Pole Contactor, 1SBL321074R8110

• Conventional Free-air Thermal Current (I_th):

  acc. to IEC 60947-4-1, Open Contactors q = 40 deg C 65 A
  acc. to IEC 60947-5-1, q = 40 deg C 16 A

• Rated Operational Current AC-1 (I_e):

  (690 V) 40 deg C 60 A
  (690 V) 70 deg C 42 A
  (220 / 240 V) 55 deg C 60 A

• Rated Operational Current AC-3 (I_e):

  (220 / 230 / 240 V) 55 deg C 40 A
  (380 / 400 V) 55 deg C 40 A
  (415 V) 55 deg C 40 A
  (440 V) 55 deg C 37 A
  (500 V) 55 deg C 33 A
  (690 V) 55 deg C 25 A

• Rated Operational Power AC-3 (P_e):

  (220 / 230 / 240 V) 11 kW
  (380 / 400 V) 18.5 kW
  (415 V) 18.5 kW
  (440 V) 22 kW
  (500 V) 22 kW
  (690 V) 22 kW

• Rated Operational Current AC-15 (I_e):

  (220 / 240 V) 4 A
  (24 / 127 V) 6 A
  (400 / 440 V) 2 A
  (500 V) 2 A
  (690 V) 2 A
  (380 / 440 V) 3 A

• Rated Short-time Withstand Current (I_cw):

  at 40 deg C Ambient Temp, in Free Air, from a Cold State 10 s 400 A
  at 40 deg C Ambient Temp, in Free Air, from a Cold State 15 min 65 A
  at 40 deg C Ambient Temp, in Free Air, from a Cold State 1 min 150 A
  at 40 deg C Ambient Temp, in Free Air, from a Cold State 1 s 600 A
  at 40 deg C Ambient Temp, in Free Air, from a Cold State 30 s 225 A
  for 0.1 s 140 A
  for 1 s 100 A

• Maximum Breaking Capacity:

  cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 440 V 820 A
  cos phi=0.45 (cos phi=0.35 for Ie > 100 A) at 690 V 340 A

• Maximum Electrical Switching Frequency:

  AC-1 600 cycles per hour
  AC-15 1200 cycles per hour
  AC-3 1200 cycles per hour
  DC-13 900 cycles per hour

• Rated Operational Current DC-13 (I_e):

  (110 V) 1.1 A / 121 W
  (220 V) 0.55 A / 121 W
  (400 V) 2.8 A / 134 W
  (500 V) 2 A / 144 W
  (125 V) 1.1 A / 138 W
  (24 V) 6 A / 144 W
  (250 V) 0.55 A / 138 W

• Rated Insulation Voltage (U_i):

  acc. to IEC 60947-4-1 and VDE 0110 (Gr. C) 690 V

• Rated Impulse Withstand Voltage (U_imp):

  6 kV

• Maximum Mechanical Switching Frequency:

  3600 cycles per hour

• Rated Control Circuit Voltage (U_c):

  50 Hz 24 V
  60 Hz 24 V

• Degree of Protection:

  acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20
  acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20
  acc. to IEC 60529, IEC 60947-1, EN 60529 Main Terminals IP20

Environmental

• Ambient Air Temperature:

  Close to Contactor for Storage -60 ... +80 deg C
  Close to Contactor Fitted with Thermal O/L Relay -25 ... +55 deg C
  Close to Contactor without Thermal O/L Relay -40 ... +70 deg C
  Near Contactor for Operation in Free Air -40 ... +70 deg C

• Climatic Withstand:

  acc. to IEC 60068-2-30 and 60068-2-11 - UTE C 63-100 specification II

• Maximum Operating Altitude Permissible:

  3000 m

• RoHS Status:

  Following EU Directive 2002/95/EC August 18, 2005 and amendment

Technical UL/CSA

• General Use Rating UL/CSA:

  (600 V AC) 60 A

• Horsepower Rating UL/CSA:

  (120 V AC) Single Phase 3 Hp
  (240 V AC) Single Phase 7.5 Hp
  (200 ... 208 V AC) Three Phase 10 Hp
  (220 ... 240 V AC) Three Phase 15 Hp
  (440 ... 480 V AC) Three Phase 30 Hp
  (550 ... 600 V AC) Three Phase 40 Hp

• Tightening Torque UL/CSA:

  Auxiliary Circuit 9 in·lb
  Control Circuit 9 in·lb
  Main Circuit 20 in·lb