Showing 39 out of 8687 products
Dynamically Balanced Rotating Parts: Minimum Vibrations Protect Components from Damages...
Higher Suction Power & Give High Discharge in its Operating
No Rusting: the Pump is Painted with High Grade Powder
Energy Efficient Motor: Power Saving F Class Insulation Motor Reaches
High Quality Mechanical Seal has Long Life & it Completely...
High Suction Lift: Higher Suction Power & Give High Discharge
Heavy Duty Brass Forged Impeller with Vane Type Fins for
This Pump Has An Amazing Features of Auto Shut down
Self-Priming Up To 7.5 m: The Pump Features Self-Priming Technology...
Compatible with Ups Back-Up: One of the Most Attractive Features...
High Quality Mechanical Seal has Long Life & it Completely...
High Suction Lift: Higher Suction Power & Give High Discharge
The Motor is Protected by T.O.P, which Ensures the Motor...
Energy Efficient Motor: Power Saving Motor
Easy Maintainable Designs: Easy Maintainable Design & Better Interchangeability of
Higher Suction Power & Give High Discharge in its Operating
Runs Quietly
Double Ball Bearings
The Pump Turning on & off Pressure can be Changed
It Comes with 24 L Pressure Tank for Maintaining Adequate
High Quality Mechanical Seal has Long Life & it Completely...
Long Life: High Grade Pump C.I Castings (Fg-200 Grade) Ensures...
The Motor is Protected by T.O.P, which Ensures the Motor...
Leakage Proof: High Quality Mechanical Seal Has Long Life. it...
In-Built Thermal Over Load Protector
Single-Phase Water Pump
Silent & Dynamically Balanced Motor
Sealed Ball Bearings
It has a High Discharge Range, Which Means the Pump
It is Ideal for Automatic Fixed Domestic Applications, For Draining
Energy Efficient & Continuous Running Duty
Low Vibration Which Helps in Increasing Durability & Reliability of
Silent & Dynamically Balanced Motor
Energy Efficient Motor with Overload Protection
Extra Lifting Capacity: Heavy Duty Brass Forged Impeller with Vane
Thermal Overload Protection: Protects the Motor in Case of Heating
Thermal Overload Protection: Protects The Motor In Case of Heating
Sturdy Design
Powder Coated Aluminium Extruded Motor Body for Better Heat Dissipation
Motor can Operate with Wide Voltage
Motor Doesn't Get Burned & Works Smoothly Even at High
Affordable, Light-Weight & Best Pump Choice for Thin Liquids &
High Grade Pump Castings Ensures Very Slow Rusting of Pump
Energy Efficient
Duty: S1
Cooling Method: Totally Enclosed Fan Cooled
Lightweight & Compact Design
High Efficiency & Energy Saving Design
In-Built Thermal Overload Protector
Sturdy & Compact
Pumps Have Higher Suction Power
Motor Doesn't Get Burned & Works Smoothly Even at High
Pump Seal
Dynamically Balanced Rotor
Sealed Ball Bearings
Energy Efficient Motor With Overload Protection
Easy to Install (2 Wires Are Attached with Controller, 1St...
Good Performance
Total Head: 150 ft
Thermal Overload Protector to Protect the Motor in case of
Totally Enclosed Fan Cooled Motor (TEFC): The Pump Includes a...
High Efficiency & Energy Saving Design: Innovative Design Manufactured at...
Manufactured in ISO unit
Used to protect a wide range of motors on the
High Quality & Long Life Mechanical Seal
High Efficiency & Energy Saving Design
Pump Performance: Pumps Have Higher Suction Power & Give High
Pump Casting: High Grade Pump Castings Ensure Very Slow Rusting...
Dynamically Balanced Rotating Parts: Minimum Vibrations Protect Components from Damages
Lightweight & Compact Design: Constructed with Special Grade Engineering Materials,
Automatic Water Pressure Pump Suitable for Water Circulation, Washing Machine,
Vibration-Less, Noiseless Operation
The 0.5 Hp, Blue, Plastic Body Sewage Submersible Pump Weighs...
The Sewage Submersible Pump has a Frequency of 50Hz &
This Single Phase Submersible Pump with the Control Panel is
This Single-Phase Oil-Filled Borewell Submersible Pump is Made from High-Quality
Easy for Maintenance
Low Power Consumption
Looking for pumps and motors for your industry? First and foremost, it's crucial to understand how water pumps and motors work. A pump is a mechanical device that transfers electrical energy into hydraulic energy to mechanically move fluids (liquids, gases, or occasionally slurries). The water engine is a positive-displacement engine powered by water pressure that frequently resembles a steam engine in terms of its pistons and valves. A pump uses natural forces to move liquids or occasionally slurries. The pump's electric motors drive the impeller. A centrifugal pump works by utilizing the centrifugal force generated by the rotation of an impeller with several blades to provide energy to the liquid.
In managing your water supplies, the pumps and motors are crucial. Choosing the best water pumps motors at wholesale price is required. A water pump can irrigate agricultural land or drain water from a basement or shallowly flooded areas. It can also be used to drain and fill a swimming pool or a dam. Water pumps' primary purpose is to move water between two sites or remove extra water. High efficiency and air removal from the lines are additional requirements. The space between the outside edge and the revolving pump must be small for optimal performance.
Submersible pumps: A device with a hermetically sealed motor tightly attached to the pump body is referred to as a submersible pump. The entire assembly is dipped in the liquid that has to be pumped. Septic tank pumping is effectively accomplished with these pumps.
Pump accessories: Pump accessories comprise all apparatus and elements related to pumps, such as jet pumps, submersible pumps, deep well turbine pumps with right-angle gear drives, water pump motors, and other parts and fittings installed or connected to the well.
Control motor starters: One of the key inventions for water pump motor control applications is the motor starter. As the name suggests, a starter is an electrical device that regulates the electrical power used to start a motor. These electrical apparatuses are also employed to halt, reverse, and safeguard electric motors.
Electric Water Motor: An electric water motor is used in many applications to carry out the relatively straightforward function of moving fluid. Electric water motors are gradually displacing conventional mechanical water motor pumps in the global market due to their superior performance, efficiency, and precision.
Flow rate: This describes the water pump's efficacy in general. The term "flow rate" describes how long a water pump takes to move a certain volume of water, typically expressed in litres per minute. You should buy a water pump with more than 2500 litres per minute if you intend to use it on farms or construction projects.
The inlet's dimensions: Inlets for most pumps range from 1 to 6 inches. Like reciprocating water pumps, centrifugal pumps draw water in via the inlet and discharge it through the output valve. In that situation, the pump would be able to pump out more water and complete the task more quickly the larger the size of an input valve.
The maximum pressure and head: The greatest height over which a water pump can move water is the maximum head of the pump. The type of pump you select should typically have a maximum head greater than the height from which you plan to pump water.
How well-made the pump is: The name of the water pump is the first item to take into account. The engine or motor pump can also determine the quality of the pump. Make the appropriate inquiries and surveys regarding the standards for a water pump.
Siemens/Simotics: Electric motor pumps made by Simotics/Siemens are known for their high efficiency, innovation, and quality. From ordinary electric motors through servo motors for motion control applications up to high voltage and DC motors, they cover the entire range of industrial motors, both synchronous and asynchronous. They have incredibly dependable, powerful, and long-lasting water pumps. They also include a tonne of features that make your work simple.
Crompton: Crompton is a Mumbai-based manufacturer of electrical equipment in India. The business manufactures lighting and electrical consumer durables, such as fans, pumps, and home appliances like air conditioners, water heaters, and kitchen equipment. The wide selection of consumer pumps from Crompton for use in the home and specific applications are reliable and offer consistent performance.
Bharat Bijlee: Since 1946, Bharat Bijlee has been producing motors and is one of the most reputable and well-liked in the nation. They offer the broadest selection of motors to meet the needs of various industries. They produce the best solutions for exceptionally demanding and difficult applications, and their custom motors are created to meet the requirements of each application.
Kirloskar: Indian conglomerate Kirloskar Group has its main office in Pune. The quality standards of the NFPA and FM/UL Standards are met by the UL listed, and FM authorised Kirloskar FM/UL pumps. They are more desirable because their pump system is more reliable at preventing property damage in the event of a fire, thanks to these international approvals.
Buying Pumps and Motors of good quality is not the only thing you should be concerned about; after you have bought that product, you should take care of it so that it lasts long. Typical preventive pump maintenance comprises the following: verifying the vibration, lubrication level, and bearing temperature. Packing leaks at 40–60 droplets per minute, although mechanical seals appear to be completely leak-free. Place your order for motor pumps at a wholesale price using the payment option that is most convenient for you. Enjoy hassle-free shopping at your fingertips, whenever and wherever you want it. To get the best products, refer to Moglix.
Does pump and motor need earthing?
It is advised that the ground wire on each well pump motor be connected to the same service ground as it would be on any other motor. A safety concern, grounding protects against electric shock or electrocution from leaking electricity.
What safety precautions do you need to follow when operating motors and pumps?
It's crucial to prevent pumps and motor from overheating; to do this, always leave the suction and discharge lines open while the pumps and motors are in use. In contrast, if overheating develops, shut off the pump and motor right away and let it cool to room temperature. Before resuming, slowly and cautiously vent the pump and motor at the drain plug.