For many of us, our car is very close to our heart and we try everything possible to maintain it in the best of its state. For us, the looks of our car also matter; hence, no matter how much we drive our car on the road, we make sure that it looks like a brand new one – shiny and twinkling.
Now, to ensure that you have the best looking car, there are three major things that you should note –
- Drive your car carefully
- Do periodic maintenance
- Clean it on a regular basis.
Usually, we depend on the outsourced service to clean our car and don’t take the responsibility, as it takes more time and effort and we may get exhausted during the cleaning process.
But now, you don’t need to put in much effort to clean your car, all thanks to the high-tech pressure washers. Gone are the days when you needed a bucket and sponge to clean your car. Now, you use pressure washers to clean your car, with ease and comfort.
Using a pressure washer is easier than you think. All you need to do is to follow some guidelines and proper care. In this way, car cleaning would be more fun.
There are some important steps that you need to follow while using a pressure washer to wash your car:
Step-1: Setting Up
Take out your pressure washer and check that you have kept everything that you need at one place. Unwind the electrical cord and connect it to power. Make sure your pressure washer’s wire does not sit in water as it might be dangerous. Connect the garden hose to the main’s water rather than via a water tank. All the pressure washers are not capable of drawing water from a tank.
Now, unwind the pressure washer hose and avoid any twists or kinks in it. Your pressure washer would have a lance depending on the model; connect the hose to lance to achieve a spray fan for car washing and cleaning.
Step-2: Adjust the Nozzle
First of all, place the nozzle correctly and always use it with a wide-angle spray tip for car cleaning. The correct size of the nozzle helps in spreading the water on the car surface. Right pressure and nozzle prevent the paint damage in the car.
Note: The narrow tip of the nozzle covers less area with high outlet pressure while a wider tip covers more area with less outlet pressure.
Step-3: Let’s Start
After setting up the pressure washer, now is the time to start the car washing and cleaning process. Park the car on the concrete or cemented surface to avoid tiny stones fly up and damage the paint. Close all the windows properly and then wash the entire car with plain water using a pressure washer. It removes dirt, mud and debris stuck on the car surface.
Note: Point the nozzle at the ground for the first spray to adjust the pressure.
Step-4: Apply Detergent
After washing the car with plain water, you can apply detergent on your car. Make sure your detergent is compatible to use with a pressure washer. Do not use domestic washing detergent for the cleaning process, as it may remove the wax finish of the paint. Let the detergent stay on the car for 5-10 minutes, but do not let it dry.
Step-5: Dry your Car
Now, rinse off the detergent using your pressure washer by working from top to down. You can also dry your car with a clean and soft cloth. Now, see how a pressure washer boosted your car’s visual appeal.
Remember these things to Check After Cleaning:
- Check the interior of your car after cleaning to confirm no leakage
- Do not use high spray settings on old tires
- Do not spray on engine
- Make sure you do not spray directly at the panel gaps for too long
- To prevent stickers from peeling off, spray it on the front side by pointing the pressure nozzle
These are some tips that you can follow while using a pressure washer to clean up your car. Apply these steps and make your car look new for a long time.
