An angle grinder is a handheld power cutting tool that is used by construction workers and contractors for cutting and grinding materials. While cutting roof tiles, bricks, and slabs, you will require an angle grinder. This tool is convenient for any kind of hard material but it is important to use this tool safely otherwise you would be injured. Here, you can check some tips and tricks while using an angle grinder for maximum use and safety:
Use the Right Tool: For safe use of an angle grinder, it is important to choose the perfect wheel. Angle grinders come with two-wheel sizes i.e. 115 mm and 230 mm. The first one is smaller and not suitable for deep and bigger tools. For the large slab stones, use a 230 mm wheel.
Wear Protection: It is necessary to protect yourself from debris that flies around while you cut the stone with angle grinders. Make sure you wear ear protectors, safety gloves, and most importantly goggles. The goggles should be indirect vented types because direct vented goggles can not prevent you from the small particles of rock and dust. To recognize these goggles, you can check the small holes on their sides. These are not suitable for grinding. If there are other workers in the immediate area of the angle grinder, make sure that they too wear goggles.
Pick Good Quality Discs: Do not choose any of the cheap discs while using an angle grinder as this could harm you in the future. Although abrasive discs are less expensive but a diamond disc is more efficient to make a straighter and cleaner cut. A diamond disc also lasts longer than an abrasive disc. It seems very expensive at first but if you need a disc that runs longer, this is the perfect pick for you.
Also, run the angle grinder for about a minute before you start to use it. In this way, you can make sure the disc is not defective and you can smoothly work with it.
Set Up your Materials Correctly: Make sure you elevate pieces when preparing to cut stone so that it is off the ground. Now, your angle grinder disc will not come in contact with the ground.
Know the Correct Technique: Do not force the blade when using an angle grinder. It can shatter the blade and can injure you. Use the blade as smoothly as you can and always position the angle grinder so the wheel spins away from stone edges and not into them, as this will stop debris flying onto your face.
These are a few safety tips that should be followed while using an angle grinder. If you are planning to buy an angle grinder for your use, visit moglix.com, an online platform that offers the best products with the best deals.
