Table saw is one of the most important tools around which a carpenter’s job is centered. This power tool is less expensive and is portable as compared to its counterparts. From DIY modelers to professional production, you would need a table saw for every craft to get finished.
However, many times, we make mistakes in choosing the right table saw, which is not only a monetary loss but also results in average and delayed results. This is where we come as a rescue. In this article, we will be discussing the factors and features that should be considered before buying a table saw.
Table Saw Standard Components
Before you get to know the buying tips, let us understand the components of a table saw:
- Rip Fence: It is a bar on the table saw that works as a guide for a workpiece when it moves past the blade.
- Miter Gauge: It can be adjusted to move the workpiece for making cuts at specific angles.
- Bevel System: Mechanism that allows moving the blade to make level cuts.
- Riving Knife: Reduces the risk of the boards kicking back towards the operator.
- Anti-Kickback Pawls: These are metal arms with teeth that grab a workpiece.
- Blade Guard: It protects the operator from dust and debris.
Motor Power: The power of the table saw increases from benchtop through cabinet models. At the job site, these tools narrow things down considerably. For any job, you would want a 15-amp motor and would need 120V AC power.
Drive Type: Most of the table saws use a direct drive motor. You can see belt drives in the more powerful cabinet saws. Buy a table saw that has a suitable drive type to work smoothly.
Blades: Keep other features aside, it’s a blade that does all the work. No matter what features you want in your table saw, its blade must be perfect. Start with a quality blade and you would get a quality product in the end.
The diameter of the standard table saw blade is 10”. The common cordless saws have a blade of 8-1/4″ that gives depth cutting.
RPM: With direct-drive machines, the RPM of the motor is the same as of the RPM for the blade. Generally, the RPM of a table saw ranges between 4,000-5,000. There is a limit to how much power you can draw from it. Each manufacturer has to decide how they can channel it between blade speed and torque. Higher RPM doesn’t need to be always better, at a lower RPM is necessary for the carpentry related jobs. High speed can burn hardwoods while lower speed helps alleviate that.
Arbor: The arbor and trunnion hold the blade and allow it to move. Their quality increases with the power of the saws. Check its size before buying blades.
Table & Fence: Tools crafted for worksite are mounted on an aluminum table that makes them portable. For a perfect & parallel cut to the edge, you require a fence system that is perfectly square to the table. Cheaper saws have fences that can easily move out of square as they slide along the surface of the table. For quality results, avoid these things.
Rip & Outfeed Capacity: While choosing a table saw, always check the rip capacity. Capacity more than 24” is always advised because it is half the width of sheet material. Some saws offer rip of 35”. Larger table saws offer better capacity.
Those who use a table saw at the job site, opt to put a sawhorse or other support to hold the material after it passes the blade.
Miter Gauge: When the workpiece exceeds the cross-cutting capacity of a miter saw, use a table saw miter gauge. If you want long miter cuts, pay attention to its accessories.
Now that you know the helpful tips to buy a perfect table saw, go and buy one. For this, you can visit moglix.com. We offer the best table saws online at an affordable price. You can make purchases using various payment options such as debit card/ credit card/ cash on delivery.
